Category: Kitchen Services

How to Kill Crabgrass

Crabgrass is an invasive weed that can ruin your lawn. If you do not fight back, it will become a serious problem for you and may even lower your home’s value.

The first step in fighting crabgrass is knowing about its behavior and lifestyle. By understanding how this weed behaves, you will have an easier time finding ways to kill it and defend your turf from this invasive plant.

Many products out there claim they can help you get rid of crabgrass once and for all, but only a few works as advertised. In fact, some may cause more harm than good if used incorrectly because they contain harmful chemicals or toxins that can damage the grass when applied incorrectly or too often.

To make sure you choose the right product for killing crabgrass, check out our guide on how to kill crabgrass below.

How to Kill Crabgrass Naturally

If crabgrass is a problem in your yard, you have more than one way of getting rid of this weed. The most natural way is to cultivate a healthy lawn and outcompete the pesky weed. Other natural ways include pulling the weed in the spring, providing your lawn with the proper nutrients, and reseeding where necessary.


Image credit: https://peppershomeandgarden.com/

For tenacious crabgrass infestation, you can learn how to kill crabgrass with post emergent herbicides that kill grass well after germination. Post emergent herbicides work by killing the crabgrass plant.

On the other hand, pre eminent herbicides kill crabgrass before the seeds emerge. This makes it easier to get the job done and allowing you time in the season to cultivate a lawn where there once were weeds.

When to Kill Crabgrass

It’s important to familiarize yourself with the plant’s life cycle to effectively eradicate crabgrass. When spring soil temperatures reach 55 to 60 degrees Fahrenheit, crabgrass seeds germinate. From mid summer through fall, the plant produces more seeds to increase its numbers. Once the first frost arrives, the plants themselves are killed, not the seeds.

When using an organic method, wait until the seedlings are big enough to hand pull the roots and all. While crabgrass doesn’t spread via roots, removing the whole plant in early spring before amending the soil and reseeding is essential.

Pre-emergent herbicide, also known as crabgrass preventer, comes in either a granular or liquid form and kills crabgrass seedlings right as they germinate.

How to Kill Crabgrass Step by Step

Tools and Materials

Post emergent herbicidePre emergent herbicideNon selective herbicideWork glovesOrganic compostPitchfork or weeding toolGrass seedPump sprayerGarden rakeSpadeSafety glasses

Pull Out the Crabgrass by Hand or Using a Tool

Before you start, you should gear up. Wear eye protection, gloves and old clothing that you don’t mind getting dirty. Also, the soil will be wet, so make sure your shoes aren’t worn out. Before hand pulling the young crabgrass, water the problem area with a sprinkler or garden hose and wait about 30 minutes for the water to soak in.

Pull Out the Crabgrass by Hand or Using a Tool
Image credit: https://ae01.alicdn.com/

This method is very important because even if you use herbicide to kill crabgrass weed, you’ll still have to dig it out to completely get rid of it. Try this method before using chemicals because chemicals have detrimental effects on the surrounding lawn grasses. Removing crabgrass naturally by digging up is a great way of eliminating the weeds without killing lawn grass.

pply a Crabgrass Killer Herbicide

Different types of crabgrass killer herbicides are available, but you need to make sure the one you choose is for your type of lawn. For instance, a homeowner with a St. Augustine grass lawn should not use a product designed for a Bermuda grass lawn because it will kill St. Augustine and the weed.

Apply a Crabgrass Killer Herbicide
Image credit: https://www.thespruce.com/

For buffalo grass, centipede grass, fine fescue, Kentucky bluegrass and perennial ryegrass, use herbicide with mesotrione as an active ingredient. It’s also important to read and follow the herbicide label instructions carefully. Improper use of these products can not only kill crabgrass but also other plants in your lawn.

Use a quality broadleaf weed killer to kill the crabgrass plants that remain after the seeding process. It will take several weeks to work, but it should eventually kill off any remaining crabgrass plants. Raking up all dead grass will make it easier for homeowners to keep the area free of crabgrass seeds.

dd Compost

Use a fertilizer with crabgrass fertilizer added to it to save time. Apply the fertilizer just before it rains to work the fertilizer and the herbicide into the soil. This will help thicken the turf. Thicker turf helps to squeeze out crabgrass plants missed by the herbicide. You can also learn how to make compost to use instead of artificial fertilizer.

pply Grass Seed

If you have large bare patches in your lawn, reseed these areas with a good quality grass seed mix. A mix that contains perennial ryegrass, Kentucky bluegrass and tall fescue is a good choice. These grasses are all cool-season grasses that will germinate and grow quickly, helping to fill in the bare spots.

pply Corn Gluten Meal

Corn gluten meal is a by-product of the corn milling process. It is a natural, organic herbicide that helps to suppress crabgrass growth. Apply it in the spring, before crabgrass germinates, at the rate of 10 pounds per 1,000 square feet.

Water the area well after application. Corn gluten also works as a lawn fertilizer due to its high nitrogen content. It works by inhibiting crabgrass seeds from forming roots after germination. Corn gluten meal can be put down as pre-emergent to prevent crabgrass and other weeds that germinate in the spring.

However, corn gluten doesn’t prevent the germination of crabgrass. Instead, it only controls it by feeding lawn grass with sufficient nitrogen, making lawn grass grow faster, choking out crabgrass.

Fight Crabgrass with Healthy Lawns

Fight those pesky crabgrass infestations by first building a healthy lawn. Black Medic, tall fescue and hybrid Bermuda grass varieties are all known for their ability to handle stress and drought and do not encourage the spread of crabgrass. A thick lawn provides a dark canopy of grass blades over the seeds to sprout.

Thoroughly water your lawn once a week to encourage the grass’s root system to go deeper, making the whole lawn hardier and heat tolerant. Avoid short, frequent watering as the sips will promote a shallow, weaker root system in your lawn. Also, don’t mow wet grass if you want to encourage healthy growth.

pply a Double Dose of Herbicide to Crabgrass Hotspots

Limit crabgrass growth in areas like driveways, sidewalks and curbs or on south-facing banks by doing a targeted double treatment when necessary. This is because these areas absorb a lot of heat during the summer months, making them more susceptible to crabgrass.

Once you’ve treated your entire lawn, go back and make another pass about six to eight feet wide, along with hotspot areas. This will help keep crabgrass from taking hold.

Burn Weeds Off With a Blow Torch

When you’ve got an area where there is no grass at all, or you want to kill the weeds and not take out the entire lawn, try this trick. The target weeds absorb so much heat that they will pop when hit with flame. Some varieties of quack grass, for example, will burst into flames with just a couple of seconds of direct exposure to the torch flame.

However, be careful when using this method, as you can also damage nearby plants if you’re not careful. Make sure that you keep the flame moving and don’t hold it in one spot for too long. Also, avoid burning the lawn if it’s still wet from dew or rain.

This method is effective for killing weeds growing underneath the base of a tree, as the flame will effectively kill everything within about 3 to 4 inches of where it meets the ground.

Mow the New Grass

Crabgrass has a tough triangular stem to slice with a weed eating blade. However, if you take your mower and raise the blades as high as they will go, you can effectively cut the grass at its base. While this may not kill it immediately, it will prevent it from growing back for a period of time while the new grass takes hold.

If you have a lot of crabgrass, it’s best to start with the highest blade height and then work your way down as the new grass grows in. This will allow the lawn grass to protect its turf, depriving crabgrass seeds of the light they need to germinate.

Use Vinegar to Kill Crabgrass Organically

Vinegar is a natural herbicide that can be used to kill crabgrass. It’s important to use white distilled vinegar, as other types of vinegar may not be effective. To use vinegar to kill crabgrass, mix one part vinegar with three parts water in a spray bottle.

Spray the mixture on the crabgrass and weeds, and then wait for the weeds to die. Be sure to avoid spraying vinegar on any plants you want to keep, as it will kill them.

Use Baking Soda to Kill Crabgrass Naturally

Baking soda can be used to kill crabgrass. When making the mixture, it’s very important that no additional ingredients are included. To use baking soda for killing crabgrass, mix one tablespoon of baking soda with one cup of water.

Add baking soda slowly, so the solution doesn’t bubble over when mixed. Pour this mixture on the crabgrass that you want to kill.

FAQs on How to Kill Crabgrass

What kills crabgrass and not the lawn?

Post emergent herbicides such as all in one weed killer or image herbicide kill crabgrass plus other lawn weeds and leave the lawn healthy.

Is there an organic way to kill crabgrass?

Yes, you can use baking soda as an organic way to kill crabgrass. Baking soda is a natural herbicide and will not harm the green lawn or surrounding areas.

What causes crabgrass?

Crabgrass is a summer annual weed that thrives in hot summer weather conditions and does best in soil with a neutral to acidic pH level, typically between 6 and 7.5. It becomes dormant during the winter months and will remain until springtime when the soil warms up.

Crabgrass is typically seed produced; however, it can also reproduce via its roots or stolons in the same season in which it germinated.

Final Thought on How to Kill Crabgrass

As you can see, crabgrass is an unsightly weed that can wreak havoc on your lawn. It is important to get rid of crabgrass at the first sign of its germination to keep it from spreading. The most effective way to get rid of crabgrass is through preventative measures, such as applying pre-emergent herbicides in early springtime when the soil is still cool.

If you cannot get to your lawn early in the season, you should apply a post-emergent herbicide to kill the crabgrass. These methods, when used together, will give you good results in keeping these weeds under control so they won’t wreak havoc on your lawn.

The post How to Kill Crabgrass appeared first on Kitchen Infinity.

Did you miss our previous article…
https://www.healthycravingsholistickitchen.com/?p=901

Sunroom Additions vs. Full-Room Additions

Are you looking to add some additional space and versatility to your home? Well, consider hiring a contractor to build a room addition or full room addition. A home addition has a lot of benefits such as increased home value and square footage, cozy outdoor seating areas, and more private spaces like offices and home gyms.

Both sunrooms and full room additions often use frameless glass walls and doors to increase natural light and seamlessly integrate indoor and outdoor spaces. However, when choosing between sunroom addition and full room addition, there are a few things you need to consider.

This guide talks about the difference between a sunroom and full room extensions to help you decide which one fits you best.

Sunroom Addition

If you’re looking for a cost-effective way to create additional space in your home and a welcoming area with more natural light, then sunroom additions are a great option. Sunrooms are typically less expensive to build than full room additions, and they can be used for a variety of purposes, such as a home office, family room, or even a bedroom.


Image credit: https://livingspacesunrooms.com/

Sunrooms are often referred to as screen rooms or solariums, and they are glass room additions that integrate indoor and outdoor spaces. The additions are built on concrete slabs with a light aluminum frame, and about 80 percent of the wall space is glass.

They can be equipped with stacking glass walls that lead to your patio or yard, and they can be fully enclosed and only accessible from the inside of the house. Sunrooms are a cheaper alternative to traditional room additions because they don’t require as many building materials, labor costs, insulation, and HVAC system.

Sunrooms come in two categories. These include prefab vs. custom-built sunrooms. Sunrooms can be custom-built by a local contractor who will design and build sunrooms to your specifications. Such sunrooms have traditional studs and truss framing, and shingle roofs, but the walls are predominantly glass formed by patio doors or full-length windows.

Three season sunrooms are not heated or cooled by an HVAC unit. They’re not well insulated as full room additions, so their temperatures fluctuate greatly depending on the outdoor conditions. In contrast, four season sunrooms are better insulated and boast central heat and air.

Despite being more costly than three season sunrooms, four season sunrooms are great for homeowners living in a cold climate for year-round addition. But today, sunrooms are constructed from prefabricated kits that come with framework pieces of steel, aluminum, and fiberglass, and glass panels for the walls.

Prefab sunrooms are assembled in a puzzle-like fashion by technicians. A prefab sunroom is designed and fabricated off-site then shipped in pieces to your home packed in flat cartons. Assembly can be done by a homeowner or a contractor affiliated with the prefab kit manufacturer.

Pros of Sunrooms

Lower construction cost per square foot than regular room additions.Increased natural lighting for reading, growing plants, and hosting a spaEfficient construction timeAdditional space

Sunroom Cons

May not include electrical wiring or HVAC systemLimited privacyLack of insulation makes them unusable during the winter weatherLimited to the side, front, and back of the house

Stick Built Addition

If you’re restricted by space or have a tight budget, sunroom addition is the way to go. A stick build addition is a better option if you want to add space and recent updates such as wide-open interiors with an open floor plan. Stick built is a shorthand term for any structure built from scratch.

Stick Built Addition
Image credit: https://www.theprojectplanshop.com/

In this case, it refers to house additions, room additions, and other bump-outs constructed from traditional building materials such as wood, concrete, glass, house sheathing, and shingles. These additions are great for mudrooms, kitchen extensions, home offices, and extra bedrooms.

Unlike sunroom additions, a traditional room addition is not limited to existing structures, meaning they can be built on any area of your home to increase square footage and overall property value. Room additions usually come equipped with a foundation, doors, windows, finishes, HVAC, and insulation, making them a more complicated version, although it benefits year-round usability.

They’re accessed through an interior door or archway rather than an exterior door. According to the International Energy Conservation Code, any conditioned living space cannot have more than 40 percent of the wall space given to glass windows.

Full Room Addition Pros

You can add them to any area of the houseIncreased square footage and property valueInsulation and HVAC for year-round usageIdeal for private areas

Cons of Full Room Addition

Less natural lighting and window spaceExtensive construction processExpensive materials and labor costPossible increase in property taxes and insurance

How Much Does a Full Room Addition Cost?

The cost of full room additions is similar to the cost of sunrooms, with parts and labor, plus a building permit and the frequency of use all factoring into the overall price. The increased materials used will also drive the cost up, and since room additions take more time to build than sunrooms, the labor hours will also increase the price.

Unlike sunrooms, which homeowners opt to use in part of the year, a full room addition needs insulation and to be fitted with electrical and best air conditioner connections to make it usable all year round. The use of full room addition may also help offset the overall price.

For example, if you use it only occasionally, maybe as a guest bedroom, the infrequent use may help you save money when it comes to household costs. But a frequently used entertainment or living room, complete with additional electronics, may increase your household costs.

Uses of Sunroom vs. Full Room Addition

It’s important to establish your new room’s primary use before deciding whether to opt for sunroom or full room addition. Sunrooms consisting more of glass walls don’t offer much privacy, so they’re best reserved for areas that don’t require it.

Uses of Sunroom vs. Full Room Addition
Image credit: https://idealconstructionva.com/

Family rooms, playrooms, second living rooms, and hobby rooms are popular options for sunroom use, allowing a comfortable place with natural light in which to relax. On the other hand, full room additions are best if you intend to use the additional space for something personal like a bedroom or home office.

A living room and an entertainment room can also be a great full room addition. However, most homes already have one enclosed living or entertainment, making a sunroom a better and more unusual option for communal areas.

FAQs on Sunroom Additions vs. Full Room Addition

re sunrooms worth it?

This is a great question, and it depends on what you intend to use the space for. But other than adding value to your home, a sunroom is an upgrade that can improve the quality of your life all year round.

Which side of the house is best for a sunroom?

If you want your sunroom, you catch as much sun as possible, then build on the south-facing section of the house. If you like watching the sun come up, then an east-facing position is best, while west-facing allows you to enjoy the late afternoon sun and sunset.

Final Thought on Sunroom Additions vs. Full Room Additions

Whether you’re looking to create a cozy place to relax, a private home office free from distractions, or a bright playroom for kids, a sunroom is a great addition. If you’ve always wanted more space and fresh air, then consider adding on a sunroom to enjoy all four seasons.

A full room addition provides those nice things and new square footage that can feel like an entirely new part of your home. You’ll gain functional floor space and perhaps even some needed storage. If you decide to add a sunroom or full room addition, be sure to work with a professional contractor that can help you determine your best option.

The post Sunroom Additions vs. Full-Room Additions appeared first on Kitchen Infinity.

Did you miss our previous article…
https://www.healthycravingsholistickitchen.com/?p=898

What Is the Meaning of Jasper Stone?

You may know that jasper is a gemstone, but do you know what it means to be a good stone? Jasper has many different meanings and uses. One of the most common uses for this gem is jewelry.

If you are looking for an alternative to diamonds or gold, consider using jasper stones as your next purchase. It’s beautiful and interesting to look at and you can even use it as home decor. Keep reading to learn more about jasper stones.

What is Jasper Stone?

Jasper stone is a variety of Chalcedony, a microcrystalline variety of silica.  Known as supreme nurture, this is a stone of grounding energies and stability that provides comfort, security, strength, and healing.


Image credit: https://crystalstones.com/

This beautiful stone comes in different colors, including red, green, brown, and yellow. Each of these colors is believed to have healing and magical properties.

History and Jasper

Ancient Egyptians believed that wearing jasper would increase sexual energy and aid fertility. Native Americans thought that jasper had both magical and healing properties and used it to connect to the spirits. According to the Bible, jasper is of the sacred stones that formed Jerusalem.

Magical and Healing Properties of Jasper

Jasper is a stone of protection and has been used to ward off evil spirits. It is also said to attract good luck and prosperity. Jasper is thought to be a powerful healing stone that can help with a wide variety of physical and emotional issues.

It is said to promote feelings of peace, relaxation, and security. This nurturing stone is said to help achieve a state of calm and zen and protects your energy by absorbing all the negative energy, making it a great one to have on hand when you’re going through a hard time.

For the green warriors out there, it also helps clear out spaces for environmental pollution and radiation. This highly protective stone can be used to promote dream recall.

What Color is Jasper Stone?

Jasper stone is always multicolored with a unique and consistent pattern habit. The color palette is usually along the earth color spectrum, with the common colors being red, green, yellow, or green. Its name comes from the Latin and Old French words for spotted or speckled stone.

Colors and Types of Jasper

In addition to the generic healing properties of jasper, different colors of the stone are said to have their specific benefits.

Black Jasper

Also known as Blackstone, black jasper is a highly protective stone that is great for grounding energies, especially if you’re experiencing spaciness. It can help in connecting one’s variations to the earth. Black jasper is also useful in relieving pain and helps stomach ailments and foot problems.

Black Jasper
Image credit: https://cdn.shopify.com/

Red Jasper

Red jasper is a stone that brings good luck and fortune. It is linked with the sacral chakra and can help balance and stability in one’s life. Some sources say it’s useful for arthritis, blood disorders, urinary infections and insomnia issues, and physical energy.

Red Jasper
Image credit: https://cdn11.bigcommerce.com/

It’s deep in color and has a strong connection to the earth. It’s a very grounding stone and symbolizes strength and stamina, both emotionally and physically. It’s a great stone to have around when you’re having to deal with challenges to your health and well-being.

Green Jasper

Green jasper is said to be the stone of calm and tranquility. It’s linked with the heart chakra. This energy can bring emotional balance and stability in one’s life and physical benefits such as circulatory and digestive problems. This jasper stone is ideal for anyone experiencing a high level of anxiety.

Green Jasper
Image credit: https://www.princemusiccompany.com/

Green jasper absorbs all the negativity and is good for anyone with nightmares. You can set a jasper gem beside your bed for relief from paranoia and terrors.

Yellow Jasper

The yellow jasper stone is known as the supreme nurturer. It helps to support stress and anxiety while also promoting self-confidence. This type of jasper is said to be helpful in restoring depleted vitality and energy.

It represents the solar plexus chakra which is the center of the body.Yellow jasper aids disorders of the stomach and digestive system. Plus, it also helps relieve bloating and is effective in the promotion of tissue regeneration.

Brown Jasper

The brown jasper stone is grounding and protective, providing a calm and stabilizing energy. It is said to be helpful for those who have trouble staying in the present, as it brings focus and concentration. It includes some specific formations such as picture jasper, bruneau jasper, and Bat Cave jasper.

Brown Jasper
Image credit: https://cdn.shopify.com/

Brown jasper is also known as a stone of health and healing, promoting physical well-being and vitality. It can be used to treat liver, kidneys, and other organ disorders. It helps with tissue regeneration, too.

Blue Jasper

If you’re looking to take a new opportunity and need a confidence boost, blue jasper is the perfect stone for you. Blue jasper has a penetrating, cleansing, and calming energy, making it ideal to motivate and build strength in your convictions.

Having a jasper crystal of this kind when you’re starting a new job or moving to a new city can help give you the power you need to go out and back yourself.

Brecciated Jasper

This type of jasper is known as a stone of strength and vitality. It can be used to promote physical healing and increase energy levels. Brecciated jasper is also thought to help with detoxification, making it a great choice if you’re looking to cleanse your body or boost your immune system.

Brecciated jasper is one of the most dramatic-looking jasper stones. This is because it’s a mixture of creamy red and brown and is also opaque. It’s also veined with a deep gray pattern that can have a striking effect when you look up close.

Zebra Jasper

Zebra jasper is a striped brown and white jasper that also contains black veining. It’s thought to be highly spiritual, helping boost creativity, inspiration, and relaxation.

Zebra jasper can be used for grounding during meditation or journeying because its earthy colors are designed to pull your attention toward the present moment. If you’re looking to restore some balance to your life, try to keep zebra jasper stone in your pocket as you go about your daily life.

Picasso Jasper

Picasso jasper is a brown and beige patterned jasper containing distinctive swirls. It’s thought to be highly protective due to its earthy, grounding energy. Possible metaphysical properties include calming the mind, providing peace, or bringing stability during times of change.

The swirling patterns found in Picasso jasper might symbolize a tornado or a storm. The swirling energy of the stone might sweep away negative, stagnant energy and allow for healthy new energy to come into your life.

Picasso jasper is a very social stone, so if you’re having trouble with friendships or you would like to bring extra positive energy into your life, this is a great bet.

Leopard Skin Jasper

Leopard jasper, also known as jaguar jasper, is named for its distinct spots of stunning color. The jasper crystal is loved for its detoxifying properties and is a favorite for starting a new year off on the right foot. Leopard skin jasper helps you connect with your spiritual animal totem.

Leopard Skin Jasper
Image credit: https://gem.agency/

It’s associated with spiritual discovery and shaman travel. It’s also helpful in eliminating toxins from the body and decreasing body odor. It also assists in self-healing.

Fancy Jasper

Fancy jasper is like the fairy godmother of the jasper group. It helps lighten the mood and bring joy by absorbing frustration, anger, and guilt. Fancy jasper comes in different colors, including green, red, brown, and yellow, and its protective nature makes it an easy choice for transition periods.

Fancy Jasper
Image credit: https://www.crystals-online.co.uk/

Fancy jasper may also stimulate creativity and self-discipline while encouraging rational thinking. Physically, this jasper stone is thought to rid the blood of toxins and offer protection from pollution and radiation.

Ocean Jasper

Also known as an orbicular jasper, ocean jasper is a type of jasper found only near the ocean. It is known for its beautiful orbs and swirls of color, which are created by spiritual energy. Like other types of jasper, ocean jasper is thought to have a number of benefits spiritually, emotionally, and physically.

Ocean Jasper
Image credit: https://i.etsystatic.com/

Spiritually, this jasper is thought to help connect with the spiritual world and provide guidance during times of change. It is also said to be a protective stone, helping to keep negative energy at bay. Emotionally, ocean jasper is a calming and nurturing stone, providing support during difficult times.

It is thought to help detoxify the body and boost the immune system physically. If you’re looking for a stone that can help connect you with the spiritual world, provide guidance during times of change, and offer protection from negative energy, orbicular jasper may be the right choice for you.

Poppy Jasper

This stone is a great all-around choice for those looking to add some Jasper to their collection. It is easily recognizable due to its bright mix of colors and is said to affect the emotional health of the wearer positively. This jasper is also thought to help detoxify the body and boost the immune system.

A joyful stone associated with poppies and remembrance, poppy jasper brings cheerfulness and vitality, reminding humanity to help one another. This stone can be gently stimulating or fiery in passion and intensity as needed. It provides an impetus for a variety of new experiences and encourages the development of new ideas.

FAQs on the Meaning of Jasper Stone

What color is jasper in the Bible?

Jasper is usually associated with brown, yellow, and reddish colors. However, it may describe other opaque colors of Chalcedony, such as dark or mottled green, orange, and black.

What is special about jasper?

Jasper is home to incredible features, including Mount Columbia, Alberta’s tallest mountain, Maligne lake, the second-largest glacial lake in the world, and diverse wildlife, including grizzly and black bears and mountain goats wolverines, elk, and bighorn sheep.

Final Thought on the Meaning of Jasper Stone

Whether you’re looking for something pretty to hang around your neck or wouldn’t mind a little help in the grounding department, jasper stone may be the one for you. This is a powerful addition to any jewelry box.

The post What Is the Meaning of Jasper Stone? appeared first on Kitchen Infinity.

Did you miss our previous article…
https://www.healthycravingsholistickitchen.com/?p=890

How to Troubleshoot Your Clothes Dryer

Your clothes dryer is a very important appliance in your home. It helps you save money by drying the laundry at home instead of going to the Laundromat. However, there are times when it breaks down and stops working properly.

Since most people don’t know how to fix their broken clothes dryers, they will buy a new one or take their laundry elsewhere for drying. You don’t have to do that as fixing the clothes dryer is as easy as how to do laundry itself. Below is how to troubleshoot your clothes dryer without calling the repairman or buying a new one. Let’s get started.

Tools and Materials

Voltage meterLong-handled bristle brushRigid dryer ventNew dryer fuseNew dryer power cordCotton swabRubbing alcoholNew dryer belt

Instructions

1. Check if the Dryer is Plugged In

Dryer problems happen because of power interruptions. Before you do any troubleshooting, make sure your dryer is plugged in. Check the voltage meter if there is electricity running through it.

If not, check the circuit breaker or fuse that provides energy to your dryer. Make sure that all electrical connections are tight and secure to avoid loose wiring. If you have an electric dryer, it runs on two circuits, including one for heating the element and one for the rest of the dryer.

So, if your dryer is getting hot but not drying, it could be that one of the two circuits is tripped. In this case, check the circuit breaker and reset the circuit as necessary. Also, learn how to install a dryer electric cord to avoid any electrical issues.

2. Make Sure Your Dryer is Not Overloaded

If you’re trying to dry a lot of clothes at once, your dryer might be too overloaded to function properly. In this case, try drying fewer items or use a larger dryer. Overloading the dryer can cause drying performance and noise issues when too much weight is inside the dryer.

When you squeeze too many clothes into your dryer, you decrease the airflow needed to dry clothes properly. Overloading also makes your dryer work harder, use more energy and increase drying time. Avoid filling your dryer drum more than three-quarters full.

3. Check the Breaker or Fuse

If your dryer is plugged in but won’t turn on, the power source is the first thing you want to check. It’s possible that the breaker has been tripped or the fuse needs to be replaced. Check the Breaker Box If you have an electric dryer, turn off the circuit with a tripped breaker switch and reset.

If you have a blown thermal fuse, replace it with the same amperage and rating. Also, check the voltage in the outlet using a voltage meter and make sure your outlet is functioning properly. If it’s not functioning, call the electrician immediately.

If you have a gas dryer, make sure the pilot light is lit and that you have an adequate supply of gas if the dryer is fueled with liquid propane. Both electric and gas dryers require 240 volts to operate. And if the dryer power cords fail, check the voltage and replace it if needed.

4. Inspect the Fuse, Switch, and Belt

If you have a power outage or surge in your home, it’s possible that the thermal fuse in the dryer control panel is damaged. Dryers also require a door switch to engage for the appliance to work. However, these switches can break.


Image credit: https://upgradedhome.com/

You can get them coated with lint or use a cotton swab and a bit of rubbing alcohol to clean the contact areas. Check the rubber belt that connects the motor to the drum if your dryer heats up, but the drum doesn’t turn. If it’s loose or broken, replace it. It’s a good idea to inspect the fuse, switch, and belt before a service call.

The fuse is located on the dryer wall and is usually a small, round glass tube. If it’s blown, replace it with one of the same amperage and rating. The switch is located near the dryer door and is either a toggle or rocker switch. If it’s not working, replace it.

The belt is located around the dryer’s drum, and if it’s broken, worn, or loose, it will need to be replaced. After getting the new belt, place it on the drum where the old belt had been and wind it onto the idler pulley and the motor pulley.

5. Check and Clean the Temperature Sensor

If the sensor is dirty, it will not read the correct temperature, and your clothes will not dry properly. To clean it, unplug the dryer and remove the screws that hold the sensor in place. Clean it with a soft brush and replace it.

Check and Clean the Temperature Sensor
Image credit: https://fleetappliance.com/

Test the dryer to see if it’s working properly. If your dryer turns on and shuts off very quickly, the problem could be either the thermostat or thermal resistor. The thermal fuse blows and turns off the dryer to prevent overheating.

Use a voltage meter to check the temperature sensor to determine if it’s working properly. Also, check the heating element and timer to be sure they’re receiving power. Check the user or repair manual.

6. Clean the Lint Trap

Clean the lint trap after every load of laundry to ensure your dryer is running properly and efficiently. A clogged lint trap can cause your clothes to take too long to dry. Hard lint buildup in the trap can cause your clothes to dry slowly, if not at all.

Clean the Lint Trap
Image credit: https://images2.minutemediacdn.com/

If your lint filter is full, the air is not flowing freely, and your machine is forced to work longer than necessary. After emptying your lint filter, wash with warm soapy water and let dry completely to remove any residue from the dryer sheets. Use a bit of rubbing alcohol to clean the electronic moisture sensors. This will leave your dryer working more efficiently and prevent a possible fire.

7. Check the Air Vent and Ducts

The air vent and exhaust duct play a key role in the drying process. Make sure they are clear of any debris or obstructions. If you have pets, their hair can clog up the vents and ducts, resulting in a clothes dryer that does not work properly.

If your dryer vent system is kinked, clogged, or disconnected, use a long-handled bristle brush to clean out the dryer vent. The vent should be as short as possible between the machine and the outside exhaust vent to prevent clogs. If your venting system is long and you can’t reach the entire length with a brush, use a leaf blower to clean the system or hire a professional.

If you still have a flexible white plastic dryer hose, replace it because this is a fire trap waiting for a disaster. And that’s why new building codes require a rigid dryer vent. Make sure you check the outside vent as well.

Most of them are designed with a trap door that only opens when dryer air and lint are blown out. The trap door won’t open if the vent hood gets coated with lint, especially in high humid climates.

8. Make Sure the Dryer is in a Ventilated Space

Your dryer needs to be in a well-ventilated space so the hot air can escape. If the dryer is too close to a wall, the air won’t circulate, and your clothes will take longer to dry. In fact, if the back of the dryer is against a solid surface, it can cause the motor to overheat.

If you’re installing your dryer in a closet, make closet doors have ventilation openings at the top and the bottom of the door. The front of your clothes dryer requires a minimum of three inches of airspace, one inch on the sides.

9. Check for the Heat Problem

If your clothes take too long to dry, first check the heat problem. The most common reason for clothes not drying is that the dryer isn’t getting hot enough. Hold your hand under the outside exhaust hood to check air movement. If the air movement is less than a hair dryer at high speed, clean the lint from the entire length of the system and exhaust hood.

The dryer isn’t heating if you can’t feel any air coming out. One way to test if the dryer is getting hot is to use a thermometer. Put the thermometer in the exhaust pipe and ensure it reads at least 130 degrees Fahrenheit. If it’s not reading that high, you need to troubleshoot your heat problem.

10. Check the Dryer Blower Wheel

Another common reason for the lack of heat is a blocked dryer blower wheel. This can happen if the lint screen isn’t cleaned often enough. To check if the blower wheel is blocked, open the dryer’s back panel and look at the blower wheel.

If it’s dirty, clean it with a vacuum cleaner. With the back panel open, check the blower wheel for cracks or obstructions that may be preventing it from spinning. To remove the blower wheel, open up the dryer by separating the top and front panels away from the main dryer cabinet. Pull the drum off the drum bearing to have full access to the motor and then unscrew the blower wheel from the motor.

11. Replace the Control Panel

If the dryer isn’t getting any power, you’ll need to replace the control panel. Before doing this, unplug the dryer and remove the back cover. During this step, you will find your thermal fuse, and its location will be dependent on where it is in your particular model of appliance. Read your owner’s manual for information about control panel components to order the correct replacement.

Replace the Control Panel
Image credit: https://i.ytimg.com/

FAQs on Troubleshooting Your Clothes Dryer

What is the common problem with dryers?

Excessive noise is the most common problem with dryers. A new drum belt can help eliminate some of the noise during operation, but there could be other problems if it doesn’t work.

How do I know my dryer isn’t working?

If you have no power, your dryer isn’t working. Begin troubleshooting by unplugging it and checking the power at your electrical outlet to be sure.

Does my dryer need an electrical reset?

If your dryer is making some noise but isn’t tumbling, you can check to see if the drum needs to be reset by pulling the lint out of the back of the machine where you would normally clean it. There’s a small red button on the motor that you can push with a paperclip or something similar to reset it.

Final Thought on How to Troubleshoot Your Clothes Dryer

As you can see, troubleshooting your clothes dryer can be easy if you know what to look for. If you don’t, it can be difficult and time-consuming to learn while trying different things that may or may not work.

Before getting a new dryer, make sure you try these troubleshooting methods, and if you have no clue where the problem might be coming from, don’t hesitate to call a professional.

The post How to Troubleshoot Your Clothes Dryer appeared first on Kitchen Infinity.

Did you miss our previous article…
https://www.healthycravingsholistickitchen.com/?p=870

How to Build a Wooden Gate for Your Yard

A wooden gate that is not maintained will look ugly and uninviting. It can also be a safety hazard for your family, pets, or guests. The good news is that you don’t need to hire a professional to build or repair your gate. You can do it yourself with the right tools and instructions.

You can build your good-looking wooden gate from start to finish and make it as durable as you like. Here’s how to do it.

The Tools and Materials Needed for the Job

Other than the gate, you’ll need a few common hand-held carpentry tools to get started. These include:

Tape measureWheelbarrowScrewdriverPencilMiter sawCordless drillSmall diameter drill bitCarpenter’s glueStraight edge rulerHammerShovelSafety glassesSpeed squarePosthole diggerHearing protectionOne-handed bar clamps

Steps to Building a Wooden Gate

Step 1: Preparations

When planning the materials needed to build your gate, it’s important for you to do a little math to make sure that both of the posts will be at the same height. The idea is to set one post in concrete in one corner of your yard and then make another post on the opposite side of your yard match up with it. Think through the location and weigh out all the considerations and locations where you want to build your gate.

Step 2: Dig Holes and Plumb Posts

Take the time to dig your post holes to have the same depth and size. You will also want to make sure that your posts are plumb before you set them in the concrete. Use a level or speed square to test for plumb and adjust as needed.

Step 3: Measure and Cut the Tongue and Groove Boards

Once you have the posts in place and are sure of the height, it’s time to measure and cut the tongue and groove boards. You will want to cut four pieces that are each 72 inches long. Use a measuring tape to make a pencil mark at 72 inches on each tongue and groove board. After that, cut the boards 72 inches long using your miter saw.

The frame for a basic wooden fence gate should be a simple box with four sides, usually smaller than the gate opening. Typically, you would use the same variety of wood you used on the fence. If you want a different color, redwood is sometimes used for large gates.

Step 4: Measure and Cut the Horizontal Bases

Next, you will need to measure and cut the horizontal bases for your gate. You will need a measuring tape to measure three 42-inch segments on two of the 1×6 cedar boards and not tongue and groove boards. Cut these segments, so you have three boards that are 42 inches long.

Step 5: Lay Out the Boards

Once you have your boards cut, lay them out on a flat surface and make sure they line up with each other. If the tongue and groove boards fall apart while doing this step, then move them to where they will not get in the way of your layout. This won’t be hard if you understand other carpentry work such as building a floating deck

 

Step 6: Attach the Tongue and Groove Boards

You will need to clamp the boards together while attaching them with screws. This keeps the boards in place while you attach them. Attach them to the 1×6 horizontal brace boards underneath the 7/8-inch exterior screws. Pre-drill holes for the screws to eliminate splitting. Keep a close eye on the lower boards, so they don’t move out of position when you work.

Step 7: Anchor and Plumb the Brace Posts

You will want to make sure the posts are plumb or vertical. You can use a level to check this. To keep them in place, you will need to anchor them to the ground. If your soil is soft, you can use a post hole digger to make a hole deep enough for the post to be stable. Post length should be at least ⅓ longer than the planned height of your gate.

Pour some gravel into the bottom of the hole to allow for drainage and place a cement brick at the base of each post. Make sure your posts are tall enough to reach about three feet off the ground when they are all put together or tall enough to be bent around by hardware cloth. Cover with soil and tamp down until it is solid.

Take your next two posts and place them about a foot from each other. The closer they are, the more support you will have. Decide which direction you want your gate to swing, then place one of the corner posts in between them so that it is even on both sides. Use a level again to make sure this post is straight.

Step 8: Measure and Cut the Diagonal Brace

Next, use a measuring tape to measure the length of your hardware cloth and cut it so that it is just a bit longer than the width of your yard. You can use wire cutters for this task. Put the hardware cloth into place and attach it at each corner with hog rings, pushing them down on either side of the post.

Now it is time to install the diagonal brace. This will help keep the gate stable and prevent it from sagging. Measure from the top of one post to the opposite of the other post. Mark this spot on each post and then use a level to draw a line between the two marks. Lay your straight edge over this diagonal brace, staying parallel with the lines of the horizontal slats.

Make six pencil marks on a diagonal brace parallel to the top and bottom of each horizontal brace. Remove the temporary screws, then cut the diagonal brace with your miter saw at those six marks. Three cut pieces will be discarded, leaving two cut pieces that you’ll use as the diagonal brace.

Step 9: Attach the Diagonal Brace

Run a line of carpenter’s glue over the end of the diagonal brace, then drive in a 3-inch screw. Then, press the pieces on the gate in between the horizontal braces. Weigh down the two glued pieces with cinder blocks, rocks, and anything sufficiently heavy. Let the glue dry for about two hours, then remove the weight. Drive-in two more screws, one at each end of the diagonal brace.

Step 10: Cut Frame Pieces to Size with a Miter Saw

Using a miter saw, cut the pieces of the frame to size. You can start the gate by cutting the top and bottom pieces to the same width or length as you planned for, slightly smaller than the opening in the fence. Cut the upright side planks about 3 inches shorter than the height of the gate.

Step 11: Screw-in Top and Bottom Planks

Screw the top and bottom boards to the gate frame. Position the plank, so its edges are flush with the frame, then screw into place every 16 inches or so, using three screws per board. Drill a pilot hole for the screws before putting them in to not split to the wood. Fasten with deck screws, pre-drilling to keep the wood from splitting.

Screw-in Top and Bottom Planks
Image credit: https://4.bp.blogspot.com/

Measure from the top bend to the opposite bottom corner and make sure both sides are the same. As you start assembling the gate framing, it’s good to lay it out on a flat surface such as a patio or driveway. Attach the top and bottom rails to the side rails, ensuring it’s square.

Step 12: Cut an Angle Cross-Brace and Attach it to the Top and Bottom Rails

This will help to maintain strength and rigidity. Connect these to the frame boards that match the rest of the fence by using deck screws, pre-drilling. Use a miter saw to make your diagonal cut and place diagonally onto the box and trance with a pencil where the angles go. Place the cross-brace at a 45-degree angle extending from the bottom corner of the gate to the opposite corner of the top of the gate. But if it’s a rectangular frame, make a drawing to scale and measure the angle you’ll need with a protractor.

Step 13: Cut and Install the Planks

Place the first plank with its bottom side against the foundations and side rails and tight in between them at both ends. Use a combination square to ensure all of your planks are even before screwing down. Cut the planks using a table saw and secure them using deck screws, drilling pilot holes to keep your planks nice and clean.

Step 14: Design the Top of Your Gate

The top of your gate should have a nice curve to it. Cut the two 2x6s to the desired length and then use a jigsaw to cut out the arch. Drill pilot holes and then screw the boards together using deck screws.

Start by drawing an arc across the top of the fence gate using a string and a pencil, filling it with decorative curves of your taste. If you’re a woodworker, feel free to get fancy with your decoration. Use the jig to cut along your pattern.

Step 15: Install Hinges and Mount Your Gate

Once the top is finished, it’s time to install the hinges. Place them on the upper left and right corners of the gate. Pre-drill holes and then screw the hinges in place using 3-inch screws. The final step is to hang your gate. Have someone help you hold it in place while you screw it into the hinges.

Install Hinges and Mount Your Gate
Image credit: https://i.ytimg.com/

Leave about a 1/4 inch of distance on the hinge side of the gate. Using the cordless drill and screws included with the hinges, screw the hinges at the top, middle, and gate frame. Check to ensure the gate swings properly. Adjust the hinges to level, tighten or loosen the gate if necessary. Add diagonal cross brace to keep the gate square and prevent sagging. Remember that installing a brace with a little pressure in the opposite direction will make your gate warp. So, take diagonal measurements to check for squareness.

Step 16: Mount the Gravity Latches

Mount the gravity latches on the gate frame, one near the top and one near the bottom. The latch should be positioned so that it will snap into place when the gate is closed and hold the gate shut. Drill pilot holes and then screw in place using 2-inch screws.

Use a cordless drill and the screws included in the latches to screw the slide latches in place on the top and bottom of the gate. Screw the receiving section of the latches to the gate frame and mount the flip latch in a similar fashion at the center of the gate.

Step 17: Seal the Wood

Seal the wood with a sealant or weather proofing product. This will help protect the wood from the elements and keep it looking nice for years to come. You can use a paintbrush or garden sprayer to apply your sealant.

Try to cover the whole surface evenly, making sure you hit the bottom of the planks, which absorb more water than the end grain. This area is likely to rot or become discolored so let it dry for a couple of hours in dry climates or a day in more humid climates.

Step 18: Use Your Wooden Gate

Now that your wooden gate is complete, it’s time to enjoy it! Not only will it add beauty and privacy to your home, but it will also provide a secure barrier for your family and pets.

Use Your Wooden Gate
Image credit: https://thearchitecturedesigns.com/

FAQs on How to Build a Wooden Gate for Your Yard

What are the benefits of having a wooden gate at home?

The benefits of using a wooden gate over another material are many. If you’ve already learned how to build your own house, adding a gate with the traditional look can be the best decision. It can blend in with all home styles, from modern to Victorian to an earthy farmhouse. Unlike other materials, it requires very little maintenance and looks as good as the day you installed it years later.

How can you attach pickets to the frame?

Use one angled piece from the bottom of the hung side to the corner of the latch side. Lay out pickets on the frame to check spacing and mark when you’re not satisfied.

Final Thought on Building a Wooden for Your Yard

Wooden gates provide a sense of privacy and security for your home and yard. They also add beauty and value to your property. Installing a wooden gate is a relatively easy project that can be completed on the weekend.

If you have any questions or need assistance with this project, don’t hesitate to contact a professional contractor. They will be able to help you with the planning and installation of your wooden gate, ensuring that it is a beautiful and safe addition to your home.

The post How to Build a Wooden Gate for Your Yard appeared first on Kitchen Infinity.

Did you miss our previous article…
https://www.healthycravingsholistickitchen.com/?p=866

Types of Under-Sink Shutoff Valves

Also known as fixture shut offs or stop valves, under-sink valves allow you to turn off the water to the sink without shutting it off to the whole house. The number and type of fixture shutoffs you choose will depend on how many fixtures there are and where they’re located.

The following guide will take you through different types of shut off valves that can help you identify what you have under your sink.

What is Shut off Valve?

Shut off valve is a valve that stops the flow of fluid in a plumbing system. This valve cuts off the water supply to a pipe once activated. However, shut off valves are not exclusive to plumbing systems.

They’re also used to regulate the flow of gasses.

ngle Stop Valve

The Angle stop valve is the most popular of shut off valves, being used in over 75% of homes. The valve can be rotated around its main axis to cut-off water flow. The design of the angle stop valve allows it to rotate easily, but it also makes them prone to wear and more likely to leak.

 

Also known as a compression valve, an angle stop valve is found on the pipe which exits the wall. It allows you to turn the water off to the specific toilet or faucet when replacing it without shutting all water off to the entire house. Angle stop valves are very durable and can last many years without issues. In addition, angle stop valves are generally found in either brass or chrome-plated finishes.

Straight Shut Off Valve

Straight stop valves are typically found when the water supply pipe comes out below the flow or cabinet. A straight stop valve keeps the water from traveling in the same direction where it came from before entering the valve.

Straight Shut Off Valve
Image credit: https://assets.leevalley.com/

Straight stop valves have handles that point in the same direction as the valve, and handles are located in the middle of the valve body between the inlet and outlet ports. Similar to angle stop valves, a straight stop valve also allows you to turn off the water supply to one specific area. Also, you can do the replacements and maintenance on these appliances without shutting the water supply in the entire house.

Iron Pipe Stop Valve

Iron pipe stop valves are fitted with iron-pipe sized threads to thread a female inlet port. This type of under sink shut off valve can also be adapted to other pipes by using a male iron pipe adapter that can be fitted into plastic pipes or copper pipes.

Iron Pipe Stop Valve
Image credit: https://www.pvcfittingsonline.com/

This shut off valve can be screwed or unscrewed from the end of the water pipe. You’ll only need two pliers. One to hold the water line in place and the other to tighten the valve.

Copper Sweat Shut Off Valve

A copper sweat valve is usually at the end of copper pipe sections. They are threaded to screw into the end of the pipes. Sweat is a term used by plumbers for soldering. This type of shut off valve is known as copper sweat valve because it needs soldering to copper pipe, and it’s made of copper.

Copper Sweat Shut Off Valve
Image credit: https://m.media-amazon.com/

To install these copper pipes, you’ll need common household tools like emery cloth, solder, flux, and torch. The copper pipes are installed at the time of building construction. Professional plumbers prefer this permanent and low-cost solution because they last longer.

Push Fit Stop Valves

Push fit stop valves use a collet to grip the pipe. Also known as push on stop valves, these valves are inserted into the end of the pipe, and the pipe is pushed home so that the collet grips the pipe tightly. They consist of a rubber o ring and stainless steel locking teeth.

Push fit stop valves are easy to install and can be used with copper, PEX, and CPVC pipe. The valve grips onto the pipe with metal teeth and creates a watertight seal with a plastic o ring. The small CPVC is inserted inside its intake port, and cement used with CPVC often works with PVC.

However, the adhesive used on PVC doesn’t bond with CPVC. It’s kind of overwhelming learning about this at first, but once you grasp the idea, you can fit a CPVC stop valve to a pipe by yourself.

PEX Shutoff Valve

PEX Shutoff valves are an innovation to help with fitting a pipe. The one-way valve does not let anything in or out of the line. It’s great for reducing water backflow into your home, but it can’t reduce pressure or prevent scaling on the inside of the pipe.

PEX Shutoff Valve
Image credit: https://images.fineartamerica.com/

PEX shutoff valves are more expensive than copper or brass shutoff valves. This stop valve is often attached to pipes with crimp rings or clamp rings. A ring compression tool compresses the crimp ring against the outside of the pipe while a clamp ring tool squeezes a tab on one side of the ring.

The PEX stop valves can be removed, but you have to cut off the ring, which can cause damage to the pipe. This means that the pipe needs to be shorted to get a fresh section of pipe for the new valve.

CPVC Stop Valve

CPVC stop valves are one of the more expensive types of stop valves. CPVC stop valves are used in CPVC piping systems. CPVC stands for chlorinated polyvinyl chloride. They use a specific type of cement known as glue when installed. In addition, a CPVC valve can be used on PVC pipes. But PVC adhesive doesn’t bond well with CPVC material.

CPVC Stop Valve
Image credit: https://images.thdstatic.com/

Compression Shutoff Valve

A compression stop valve is used on copper pipes. It consists of a compression nut that squeezes a brass ring into the space between a water pipe and its body. Buildings with copper water pipes use compression stop valves with a compression intake port. This allows for more compression power and reduces the need for repairs.

Ball Valve

A ball valve is a type of stop valve that uses a ball to control water flow. The valve has a threaded body and nut that screws into the water pipe. This valve is quite large and features a lever handle. It’s commonly used in places where a quick turn-on is necessary, such as the main pipe.

You can open and close it fully with a simple quarter-turn of the lever. The internal ball will align with the pipe when the valve is open, allowing water to gush. The ball will rotate 90 degrees and completely block the hole when closed.

FAQs on Types of Under-Sink Shutoff Valves

Where is the shutoff valve located at home?

The main shutoff valve for the home is generally found on the perimeter of the house. A good place to look is where the water first enters your home. The smaller valves can also be found close to appliances and fixtures such as toilets or faucets.

Final Thought on Types of Under-Sink Shutoff Valves

Shutoff valves are an essential part of any plumbing system. They allow you to turn off the water supply to a particular area, which can come in handy when you need to make repairs or in an emergency. Also, if you’re experiencing low water pressure in your kitchen sink, the first place to check is the shut off valve. Installing these stop valves is an easy task if you know where they are and which type to use.

The post Types of Under-Sink Shutoff Valves appeared first on Kitchen Infinity.

 

How to Grow Scallions

Scallions are fresh, fast, and fabulous in salads, stir-fries, and savory tarts. Also known as green onions or salad onions, scallions are harvested before they reach maturity and can be grown year-round indoors.

Fast-growing plants like lettuce that you plant directly in the ground get tall quickly but have a short harvest window of just a few weeks. Indoor onion plants grow slowly over several months with an even longer harvest window than outdoor varieties.

Scallions are also one of those crops that can be sown in late summer to give one of the earliest harvests next spring. Here’s how to grow scallions from seeds indoors, so you always have these tasty vegetables on hand for cooking or snacking.

What are Scallions?

Allium fistulosum, also known as green onions, is called bunching onions or scallions.  Scallions are produced from specific cultivars of the bulbing onion and have a mild flavor.


Image credit: https://s3.amazonaws.com/

Green onions look similar to the traditional onion known as Allium cepa. They have tall, green stalks that are usually 1 to 2 feet tall. Scallions have slender white bulbs at their base that do not get large enough to form an onion.

Scallion Varieties to Try

There are several scallion varieties. These include:

Guardsman

Guardsman scallions are known for their slow bolting. They grow to about 20 inches tall and have green leaves that are blue-green at the base. The white bulb is slender, cylindrical, and has a mild flavor. This variety takes 50 days to grow, and it straddles the line between a spring onion and scallion for taste.

Evergreen White Bunching

Evergreen White Bunching is a green onion that grows best in the spring and fall. It has thick, blue-green leaves with white bulbs at its base. The plant grows up to 12 inches tall and keeps growing every 45 days until frost. This scallion takes around 60 days to grow from start to finish.

Nabechan

Nabechan is an oriental green onion that grows about 8 inches tall with white stalks and blue/green leaves. It takes around 60 days for these scallions to grow. It’s a Japanese variety prized for its flavor.

Nabechan
Image credit: https://www.activevista.com.au/

Tokyo Long White Bunching

Tokyo Long White Bunching is a white scallion that grows to about 12 inches tall. The leaves are long and slender, with a white bulb at the base. It takes around 90 days for these scallions to grow. This variety is also known as Welsh Onion or Scallion.

Red Beard

Red Beard is a red scallion that grows to about 12 inches tall. The leaves are long and slender, with a white bulb at the base. It takes around 90 days for these scallions to grow.

Red Beard
Image credit: https://www.australianseed.com/

How to Grow Scallions from Seed

You can plant seeds indoors about 8 to 10 weeks before your projected last frost date. You can also direct sow in the garden once the threat of frost has passed. Sow your seed about 1/4 inches deep. Other onions may have slow and poor germination. So, the most important element scallion seeds need is constant moisture, making starting them indoors a good choice.

How to Grow Scallions from Seed
Image credit: https://images.saymedia-content.com/

Seedlings emerge in one to two weeks. Once you have grown, thin the seedlings to about 2 inches apart. For a continual harvest, plant new crops every four weeks.

Potting and Repotting Scallions

Scallions can be grown in pots or containers on a sunny windowsill. Use well draining soil and organic potting mix when growing scallions in containers. Cover the seeds with a loose layer of soil and water them thoroughly. Make sure you keep the soil moist and not soaked.

Potting and Repotting Scallions
Image credit: https://imagesvc.meredithcorp.io/

If you want more instant gratification, then scraps and starts are two methods that are too quick for growing green onions. You’ll have scraps left over when you buy and use scallions from the grocery store. Get your container and rich potting soil. You can make your own compost to add some nutrients to the soil.

The scallions leave between three and four inches of the white bulb intact. Make 1/2 inch deep holes an inch apart in your container and drop the scrap in. Keep the soil moist and not soaked.

The final method of growing green onions is to get the starts from your local nursery. Take your starts off from the soil and gently shake off excess dirt so you can see the roots. Get a container and fill it with rich potting soil. Trim your roots back until they’re two or three inches long.

Your pot should be narrow and at least six inches deep. Make sure your container is in an area that will get direct sunlight. Keep the soil slightly moist and don’t overwater because this allows for decay and diseases. This way, you should be able to harvest and plant more scallions after every three weeks.

Scallions Care

Sun Exposure

Give your scallion plants at least six hours of direct sunlight per day. If you’re planting indoors, put them by a south-facing window. When planting outside, put them in an area that gets the most sunlight. Plant them in a partial shade if you don’t have that area.

Soil Requirement

Scallion plants prefer rich, sandy soil with sharp drainage and a slightly acidic to neutral soil pH. Amend your soil with organic matter to ensure good drainage. If you live in heavy clay soils, add sand or gravel to the mix. Consider doing some DIY soil tests to get the best for your scallions.

Fertilizing Green Onion

Fertilize green onions with a balanced fertilizer like 10-10-10 when you first plant them and again every four to six weeks. Fertilizer rich in nitrogen such as fish emulsion is ideal for green onions because it will provide the plants with a steady stream of nutrients over an extended period and keep them green and growing.

For a longer-term solution, use granular fertilizers released slowly into the soil. You can also top-dress with rich compost.

Watering Scallions

Scallion plants have a shallow root system, so regular watering is important. Keep the soil moist and do not let it dry out. While this may seem difficult in areas with long periods of hot, dry weather, you can greatly reduce the amount of time between watering by mulching with straw or pine bark nuggets. You can also try planting scallions in a raised bed to improve drainage and provide better access to water.

If you’re growing scallions in a container, make sure the pot has drainage holes and keep it evenly moist; they will likely need more frequent watering than they would get in your garden. A well drained soil also protects foliage from excess moisture, which can cause rot.

Temperature and Humidity

Allium cepa grows best when the air temperature is between 68°-78°F. If you’re growing scallions from seed, place a heat mat over your flats to ensure even soil temperatures around 45°F.

Ensure your flats get at least 6 hours of light each day for optimal germination rates and shoot growth. Scallion seeds do not mind humid conditions as long as they have good drainage to prevent rot and other diseases.

Pruning Scallion Plant

Most of the time, pruning is done by removing wilted leaves, which should be left until it’s time to pick them. If your green onion bolts to seed and you want to prevent seed drop, trim off the flower stalk. You may also experience leaf wilt during flowering.

Pruning Scallion Plant
Image credit: https://i.ytimg.com/

Once you notice that the flowers are fading, cut the stalk once it begins to droop and set it somewhere to allow the head to dry out and the seeds to drop out of the flower.

Propagating Scallion

One method of propagation is bulbs or sets. The best way to use sets is by planting them in late fall and overwintering them in the garden. In the spring, they’ll start pushing up new growth. You can also use nursery starts of Allium cepa and plant them to achieve the green onion stalks.

Remember that only Allium fistulosum will produce green tree onions without onion bulbs. True scallion has a milder flavor than A. cepa, which has a stronger onion flavor.

Harvesting and Storing Scallions

Harvesting

Start picking your spring onions once they reach a usable size. The best time to do this is when the bulbs are white and have a diameter about the size of the pencil, but even smaller sizes can be harvested.

You can dig up the whole plant if you plant to eat the mild white bulb or snip the stem off just above the soil level and allow it to continue growing. When growing traditional bulb onions as green onions, harvest the green leaves earlier and use them like scallion plants.

Storing

Store your green onions in a partially filled jar in your fridge with enough moisture to keep the leaves from wilting. If you harvest stalks without bulbs, store the stalks wrapped in a paper towel in a plastic storage bag. You can also slice and refrigerate them in a plastic bag.

To freeze your onions, rinse them off and thoroughly pat or air dry them before freezing. Their texture will be a bit mushy when they thaw out, so it’s best to use them in cooked food rather than as a garnish. Dehydrating the stalks and grinding them into a powder is a great option for long-term storage if you have a dehydrator.

Common Pests and Plant Diseases

Pests

Thrips and aphids are common pests in onion crops and can be remedied by using a strong stream of water from a hose. If they persist, use insecticidal soap or neem oil or treat severe infestations with pyrethrin. Cutworms, onion maggots, onion nematodes, slugs, and allium leaf miners are also potential pests but can be dealt with by using prevention methods such as crop rotation or organic mulches.

You can also use a beer trap to trap slugs and snails. As long as the trap is deep as a pie pan, snails and slugs will be attracted to the beer’s aroma, which will be deep enough to drown them.

Diseases

Botrytis neck rot, purple blotch, and Fusarium basal rot are the most common onion diseases. They can be controlled by planting disease-resistant varieties and spacing plants properly. You can also remove infected plants and leaves, and use a fungicide.

White rot can also cause mold or rot at the base of the plant and yellowed, wilted leaves. If you notice the diseased plants, remove and dispose of them. Avoid planting Allium in that location for a couple of years. Practice crop rotation for the benefit of your plant’s health.

FAQs on How to Grow Scallions

Do green onions grow back every year?

These spring onions are biennial and can live for several seasons. They’ll come back after being cut down but won’t regrow if the bulbs die or are frozen.

Final Thought on How to Grow Scallions

As you can see, growing scallions is easy and can be done in almost any climate. With a little bit of care, you’ll have plenty of these delicious onions to enjoy all season long. So, what are you waiting for? Get started on your scallion garden today.

The post How to Grow Scallions appeared first on Kitchen Infinity.

Did you miss our previous article…
https://www.healthycravingsholistickitchen.com/?p=851

How to Repair Orange Peel Texture

Orange peel texture is a common issue in the home improvement industry. This problem can happen for many reasons, but most commonly it happens because of improper installation or removal of roofing materials. The good news is that there are some things you can do to fix it.

This article will outline how to repair orange peel texture and prevent future occurrences. Let’s get started.

What is orange peel texture?

Orange peel texture is a term used to describe the appearance of a surface that has been covered in a thin layer of paint or another coating. The surface appears bumpy and textured, similar to the skin of an orange. This can be caused by many factors, including improper installation or removal of roofing materials, using the wrong type of paint or sealant, or excessive weathering.

Image Credit: http://eegrestore.com

Alternatively, it may be caused by using paint or sealant that is too thick. In this case, the paint or sealant may have been applied with a sprayer instead of a roller and not properly brushed out to smooth the surface. When this happens, it can be difficult to tell which part of the roof has been painted and which parts haven’t; therefore it appears as though the entire roof is orange peel textured.

Main causes of orange peel texture

If shingles are not installed correctly, they can pull away from the roof over time, causing the underlying roofing material to appear bumpy and textured. Also, if the shingles are removed too quickly, they can tear away from the roofing underlayment, causing them to appear bumpy and textured as well.

Alternatively, orange peel texture may be caused by using paint or sealant that is too thick. In this case, the paint or sealant may have been applied with a sprayer instead of a roller and not properly brushed out to smooth the surface. When this happens, it can be difficult to tell which part of the roof has been painted and which parts haven’t; therefore it appears as though the entire roof is orange peel textured.

Finally, if your home is in a sunny or hot location, the sun may cause the paint to blister and peel, also resulting in an orange peel texture.

How to fix orange peel texture

There are several ways that you can fix orange peel texture.

In this first place choosing thebest ceiling materials to buy should be done before getting started.

If the problem is caused by using paint or sealant that is too thick, then the solution is to use a roller instead of a sprayer to apply the paint or sealant. Use a medium nap and go over it about three times with the roller, brushing out any visible lines left behind by the roller.

If your home is in a hot location and has been exposed to too much sun, you can install reflective roof shingles to reduce heat absorption and lower your cooling bills. If you applied a primer that was too thick, apply a professional grade primer at half strength so that it doesn’t dry orange peel texture.

Finally, if the problem is caused by improper installation or removal of roofing materials, then the best solution is to hire a professional to come and fix it. They will be able to properly install or remove the roofing materials so that it doesn’t pull away from the roof over time.

Tips for avoiding orange peel texture in the future

There are several things you can do to prevent orange peel texture from cropping up on your roof again.

First, if you are going to be roofing your home yourself, make sure that you do a good job. Read the instructions thoroughly before getting started and use quality materials. You’ll also want to make sure that if you’re getting someone to do the job for you, they aren’t making any mistakes as they work. This could be anything such as not adding enough shingle adhesive or tearing off shingles too quickly.

Once the roof is finished, don’t walk on it for at least 48 hours so that it can be properly dry up. This will help prevent orange peel texture from forming by giving the coating time to dry completely before it has any chance of peeling away.

If you are having any other problems with your roof, be sure to contact a professional right away. They will be able to assess the situation and recommend the best course of action. Remember, it’s always better to be safe than sorry, especially when it comes to your home.

Roof texture is not always an easy thing to fix yourself. If you are not sure how to go about repairing the texture on your roof, or if you think the problem may be more serious, it is always best to call in a professional. They will be able to take a look at the situation and let you know what steps need to be taken to fix it. By taking care of the problem as soon as possible, you can avoid further damage and keep your home looking its best.

 

How To Repair Orange Peel Texture – FAQ

What is orange peel texture?

Orange peel texture is a type of finish that is often seen on walls and ceilings. It is characterised by its bumpy, uneven surface.

What causes orange peel texture?

In addition to the types ofroof material chosen, there are several factors that can contribute to the development of orange peel texture:

Porous materials: If the surface material is porous, such as drywall or plaster, it will absorb the paint or primer unevenly. This will create a bumpy surface when the material dries.Poor surface preparation: If the surface isn’t properly prepared before painting, it will also be more likely to develop orange peel texture. The surface should be clean and free of dust, dirt, and grime.Incorrect application: If the wrong type of paint or primer is used, it can affect how well it adheres to the surface and may create an uneven texture when dried. It may also be hard for the finish coat to adhere to a rough surface produced by a poor-quality primer or paint.Drying time: Generally speaking, finishes with long drying times are more likely to develop orange peel texture than those with short drying times. This is because in some cases, the paint will begin to dry in certain areas before you have finished applying it. While this isn’t always avoidable, proper ventilation and working in small sections at a time can help minimize this risk.Environmental factors: Sometimes exterior painting jobs produce orange peel texture because of environmental factors such as humidity, temperature, and wind. Exterior painting jobs are especially affected by these factors as they can affect the drying time and how well the paint cures.

How do I fix the texture of the orange peel texture?

The process will depend on what’s causing it, but in general, you should start by eliminating any environmental influences that may be a factor. For example, if there is too much moisture in the air or if it’s very cold or hot outside, this may affect how your finish coat dries and contributes to the orange peel texture. You may have better results painting when conditions are more favorable for finishing work.

Final thoughts on how to repair orange peel texture

In conclusion, orange peel texture is very ugly and bad for resale. You should try your best to properly maintain and repair your roof to avoid this.

If you have any other questions or concerns about orange peel texture or any other roofing issues, be sure to contact a professional right away. They will be able to help you get the problem taken care of quickly and efficiently.

The post How to Repair Orange Peel Texture appeared first on Kitchen Infinity.

Did you miss our previous article…
https://www.healthycravingsholistickitchen.com/?p=828

8 Best Furniture Rental Companies

Moving into a new home can be an exciting time, but it can also be stressful. You may not know where to start furnishing your new place, and you probably don’t have the money to buy furniture. Renting furniture is a great way to get what you need without spending too much money.

Furniture rental companies offer everything from living room sets, bedroom suites, and dining tables so that you’ll always have what you need at an affordable price. The best part about renting furniture is that if something breaks or gets damaged, it’s no big deal because all of the furniture in question will be replaced with new pieces by your local rent-to-own company.

So, if you’re looking to rent furniture for your apartment, here are the best furniture rental companies available:

1. Brook Furniture Rental

Brook furniture rental is the best furniture rental company out there because they offer everything you could need for home furnishings. With so many choices available in one place, it’s easy to see why Brook Furniture Rental is the top choice for so many people. Brook furniture rental consists of free professional design services, white glove delivery, and super-fast turnaround time.

Customers can rent by item, room, or fast path to furnish an entire room. You can also choose from one, two, three, six, and twelve-month leases with significant discounts with a six and twelve-month agreement. Select the number of bedrooms, the level of furnishings you’re looking for, and choose from three pictures and three-color palettes to indicate what most closely matches your taste.

From there, the Brook will show you a sample package with items for the living, dining, and bedrooms with the option to swap out or add needed items before purchasing. Once you’ve signed a lease, Brook can deliver your furniture in as few as one or two business days, and if you’re unsatisfied with what you’ve chosen, the company also offers free returns or exchange within the first week.

2. Feather Furniture Rental Company

Feather is an excellent choice for big-city residents because it’s geared toward apartment living and small spaces. It’s available in all major metropolitan areas, such as New York City, Los Angeles, San Francisco, Houston, Dallas, Austin, Virginia, Maryland, and Washington DC. It also caters to those living in small spaces.


Image credit: https://content.fortune.com/

It’s the only rental company on this list that makes its rental furniture, and furniture is made from sustainable materials like FSC-certified wood and glues and stains with low VOCs. Feather’s plan includes one month, three-month leases, and annual membership. Rentals without membership are more expensive, making them smarter for staging and selling homes than for long-term use.

Feather furniture rental membership requires a high monthly minimum, making this service best for people who want to rent an entire apartment’s worth of furniture and not a few items. An annual membership might be a good option for roommates looking to split the furniture cost and don’t want the hassle of moving furniture when they find a new place to live.

Once the subscription period ends, customers can renew, swap out furniture or buy the items outright minus the rental fees already paid. Feather also offers discounted packages for bedrooms, living rooms, dining rooms, and home offices with the monthly cost of approximately $26 for dining room sets or full bedroom spreads, including a brand new mattress.

Opting for feather, you can renew your lease and swap your furniture for something else. Individual furniture pieces from well-known brands like West Elm are also available.

3. Cort Furniture Rental Company

Cort is a good example of companies that specializes in flexible leasing deals. The company offers furniture rental services for every room in the apartment with no hidden fees or additional charges. Besides, Cort allows customers to keep the items they rent even when their arrangement is over, which means you can save thousands of dollars on new furniture when moving out.

Cort Furniture Rental Company
Image credit: https://onhavanastreet.com/

Cort has a wide variety of furniture and electronics offerings, making it the most accessible of the many furniture rental companies out there. Like many companies that offer this service, the longer the rental contract, the lower an item’s monthly rent. It allows renters to buy out items when their rental term is up.

Plus, the rental payment made on the item doesn’t necessarily go towards that payment, although Cort will sell the item at a discounted price. Cort furniture outlets are also an option for aspiring buyers, where they offer gently used pieces at steep discounts. This company also gives renters one week to decide if an item will work in their space once delivered.

If not, they’ll pick it up and replace it free of cost. The minimum rental term is one month, and the brand also has monthly minimums for rentals. If you’re using a debit card for payment, Cort requires a credit check and may also require a security deposit. Their services work well for students and military members who can choose from whole apartment decor packages.

4. CasaOne Furniture Rental Company

With over 4,000 items, CasaOne rents home, office, patio furniture, gym equipment, and holiday decor. In addition to mid-century style bedroom, kitchen, office, dining, and living room furniture, CasaOne also offers interior design services, home staging, gym equipment, and patio furnishing rentals.

CasaOne Furniture Rental Company
Image credit: https://miro.medium.com/

They have one of the largest collections for furniture, thanks to the 4,000 items in their inventory. The company also provides rental options for seasonal decor, bedding, rugs, wall art, and picture frames. CasaOne also features brand name furniture rentals from West Elm and Article alongside offerings from brands with less name recognition that still deliver on style.

CasaOne services several metropolitan areas across the country. The price of items varies depending on the rental term, varying anywhere from 12 months. There is also a rent-to-own option. It also offers the opportunity to purchase the rental furniture by charging the retail amount minus the already paid rental fees.

The company also charges extra for early rental contract termination and furniture insurance. Still, it will deliver and assemble any rented items for no additional charge within three business days and also pick your rentals when you’re ready to move out.

5. Fernish Furniture Rental Company

Drawing its inspiration from mid-century and Scandinavian furniture design, Fernish provides premium and trendy rental options. Although Fernish is only available for customers in Los Angeles, Southern and Coastal Ventura County and Orange County, CA, Seattle, WA, and Dallas, Fort Worth, TX. This brand shows promise as a rental purveyor of on-trend furniture from the likes of CB2 and Floyd.

Fernish Furniture Rental Company
Image credit: https://www.treehugger.com/

About a week or two after placing an order, a team will deliver, assemble and arrange the furniture. If an item isn’t the customer’s preference, they’ll let Fernish know within three days, and the customer can swap it out at no additional cost. At the end of the rental term, a renter can renew, swap out items for free, or buy7 a piece of furniture by paying the difference between the total value and the rental amount that’s already paid.

If you live near the Fernish service area and swap out their furniture every few years, this rental might be the right one for you. This brand offers durable furnishings that can be used repeatedly by replacing parts and uses an 11-step refurbishment and sanitization procedure that utilizes sustainably sourced materials.

6. Rent-A-Center

Rent-A-Center is one of the largest furniture rental companies in the United States. It offers furniture, appliances, and electronics for rent with no long-term contracts required. Customers can choose to pay weekly, biweekly or monthly installments, and all major credit cards are accepted.

Rent-A-Center
Image credit: https://images.barrons.com/

Rent-A-Center also offers a free delivery and set-up service. There are no long-term contracts, and it also offers the option to upgrade rental items at any time. It offers electronics, furniture, appliances, computers, smartphones, and home decor with locations nationwide. Renters can order online or visit local stores to pick out items, finalize details, set up payment plans, and arrange same-day delivery.

The company also offers repairs and services for no additional cost during the lease term and includes upgrading products for free. If you want to buy items, they’ll offer a discount for paying off your balance early, and there are no long-term contracts, meaning that you can cancel or upgrade at any time.

7. Oliver

Oliver’s use-friendly website and interior design style quiz help get you started on finding the perfect pieces that fit your style. They have an extensive product range, including everything from bedding to lighting, with all prices indicated so you’ll know exactly what you’re spending.

The brand’s signature design quiz gives new furniture renters a jumping-off point with pre-designed rooms that can be tweaked to their liking. Once finished, the results are displayed with pieces that fit your style, rent price range, and more once finished. The site also offers access to complimentary design consultants who can help craft that perfect look.

The brand offers three plans suitable to short and long-term renters, plus those looking to rent one. Pricing is set up so that the longer the rental term, the lower the monthly cost. There are no delivery, assembly, and set up fees for the beginning of a rental term, and subscribers to the brand’s long-term plans are allotted one free furniture swap.

Subscribers to Oliver’s one-year upfront plan in which renters commit to a year’s worth of Oliver get a 10 percent discount on their rentals. Oliver is available in the Dallas Fort Worth metro area, Los Angeles, San Diego, and San Francisco.

8. Aaron’s

Aaron’s offers furniture, appliances, and electronics leasing through its Aaron’s Plus plan. Customers can choose to lease single items or an entire room of furniture. Delivery and set-up are free, with the exception of in-home entertainment installations. Customer service is available seven days a week.

There is no early termination fee; however, customers must return the merchandise in good condition. This company also encourages you to shop by style, from casual to contemporary, so choosing what you like is simple. Offering packages, special deals, and sales, this national brand is a rent-owned chain. Not only can you own items once you complete your payment, but you can pay off your balance early.

The Everest brand rents furniture, appliances, electronics, computers, and more to consumers looking for cheap rentals with no credit check required. Everest is a great option if you are on a budget but still want quality products. Many vendors are partnered with the best furniture rental companies, so you have brand names you can trust at affordable prices.

Customers can also choose to purchase the items they rent through the company if they fall in love with them. If you’re looking for a more vintage vibe, then Everest offers interesting pieces for bedrooms, living rooms, and dining rooms that are new but look like you picked them at a hip second-hand store. This service is only offered in the New York City Area.

FAQS about Best Furniture Rental Companies

How do you choose the best furniture rental companies?

Opt for the one that showcases a variety of furniture styles and features additional offerings like home decor, electronics, and service in different country areas. For instance, CasaOne is chosen because it offers a wide range of items, including workout equipment. Feather is also a good choice because it’s tailor-made for city dwellers.

Who is furniture rental good for?

Furniture rental is good for individuals who might not want to coordinate moving their furniture. And it’s not ideal for individuals who may risk falling behind on payments.

Final Thought about Best Furniture Rental Companies

Best furniture rental companies often have amazing deals and discounts to help you save money on your decorating project. Be sure to check online and in-store for special offers before making your final decision. Furniture rental companies make it easy and affordable to get high-quality furniture for your home.

The post 8 Best Furniture Rental Companies appeared first on Kitchen Infinity.

Did you miss our previous article…
https://www.healthycravingsholistickitchen.com/?p=822

12 Shrubs with White Flowers

Are you looking for plants to brighten your dark spaces? Well, white flowering shrubs may be the perfect solution for you. Not only do they look great in your garden, but also produce a wonderful fragrance.

As an element design, these white flowering shrubs convey purity and they’re often used as the foundation for moon gardens, designed to be enjoyed in the evening. Some flowering shrubs are even valued for the spring color they bring to the garden.

Here are 10 common shrubs with white flowers:

1. Japanese Andromeda

Japanese Andromeda is a flowering shrub that can grow up to 5 feet tall, with white flowers. It’s very fragrant and looks great when combined with other plants. The plant can also be shaped into a hedge or it can be grown as a single specimen.


Image credit: https://www.gardenia.net/

This is a white flowering shrub with drooping clusters of small bell-shaped flowers. The early spring blooming shrub white clusters look like lily of the valley flowers. The benefits of growing this plant include evergreen foliage offering winter interest, leaves that offer attractive red color and an early bloom period.

Also known as Japanese Pieris, this evergreen flowering shrub grows between 9 and 12 feet tall and up to 8 feet wide. To enjoy the attractive white flowering shrubs, grow Japanese Andromeda in full sun to partial shade. With the right care, this shrub will indeed form part of your gorgeous flower garden

2. Rose of Sharon

Also known as Althea, this is a large shrub or small tree that typically grows 8 to 12 feet tall but takes pruning well. It blooms from mid-summer to frost, with clusters of trumpet-shaped white flowers.

Rose of Sharon
Image credit: https://bloximages.newyork1.vip.townnews.com/

This is a hibiscus to grow if others fail you. And if you want an earlier show, try one of the cultivars with variegated foliage. This upright shrub brings late-season color to the yard, making it a darling to many gardeners. Honeybees also love their big flowers.

3. Annabelle Hydrangea

Annabelle hydrangea is a summer bloomer that will flourish with dozens of large, bushy bloomers comprising a multitude of smaller, delicate blooms of any hydrangea. Annabelle hydrangea is loved by gardeners because its blooms are quite large and last from early summer through autumn. It prefers full sun to part shade and blooms well in zones 3 to 7.

4. Mock Orange

The mock orange (Philadelphus coronarius) is an easy to grow shrub that is perfect for novice gardeners. This shrub grows in zones 4 through 8 and blooms heavily in early to midsummer with clusters of sweetly fragrant white flowers. It does best in full sun but can tolerate light shade.

Mock Orange
Image credit: https://www.gardeningknowhow.com/

Smooth mock orange can become overgrown quickly, so a rejuvenation pruning and hard pruning that cuts the bush back low to the ground is a good idea every few years. Soil needs include well drained and loamy soil while it thrives in full sun to part shade.

5. White Lilac Bushes

Lilacs (Syringa) are popular shrub choices for the garden due to their beautiful, long-lasting flowers and strong fragrance. They are an early flowering shrub that offers up large blooms in spring.

Lilacs flower in shades of white, pink and purple depending on the variety, with both single and double blooms available. White lilac flowers grow up to 8 feet long.

White Lilac Bushes
Image credit: https://www.pahls.com/

The white flowering lilac shrubs grow between 8 and 15 feet tall and up to 12 feet wide. Large lilac shrubs are ideal for summer privacy screens or hedges. If you have a small garden or container garden, opt for beautiful white blossoms of various dwarf varieties of lilac.

6. Korean Spice Viburnum

Korean spice viburnum is an example of a shrub that boasts of early spring flowers and fall colors. It has pink buds that open to become clusters of white flowers. It’s named after its fragrance, which contains a combination of sweetness and sharpness.

You can opt to grow doublefile viburnum if you don’t like the touch of pink that its white flowers retain. The doublefile type has white pure flowers but lacks the scent of Korean spice.

Yearly feeding with an acid-enhanced fertilizer will help improve its flowering if your soil lacks the acidity preferred by Korean spice viburnum. Mulching the base of the shrub with pine needles can also improve soil acidity. USDA growing zones 4 to 7 and prefers average, moist soil, acidic and well draining soil.

7. White Spirea Shrubs

White spirea shrubs are deciduous shrubs that typically have a height and spread of 3 to 4 feet. They have arching branches with white flowers in late spring to early summer. The flowers are followed by fruit which is attractive to birds.

White Lilac Bushes
Image credit: https://www.gardeningknowhow.com/

Some outstanding white blooming spirea varieties include garland spirea, bridal wreath spirea and Korean spirea. With their abundant white flower clusters, they brighten up spring and summer gardens.

The upright, rounded shrubs grow between 3 and 9 feet tall, depending on the variety. If you’re growing in containers, consider varieties such as spirea thunbergia, birchleaf spirea and white meadowsweet spirea. Their soil requirements range from medium moisture soil to well draining soil and do well in full sun.

8. Camellia Shrubs with White Flowers

The Japanese camellia is a broadleaf evergreen with showy white flowers that bloom from late until early spring. The early blooming double flowers grow 3 feet to 6 feet wide and consist of up to 2o tightly growing petals in a peony flower like shape. Their stunning flowers complement the lush foliage.

Species of the white flowering shrubs grow various sizes of showy flowers with some being as small as 1.5 feet. The shrubs with their white flowers grow well in containers and shrub borders create beautiful fragrant flowers.

9. Azaleas

Azaleas are another class of abundant white blooming shrubs that are ideal for garden borders or hedges. They bloom in early spring or late spring, depending on the variety. The great white varieties include Northern hi lights, Pleasant White, Delaware Valley White, Cascade White and Bloom a Thon White.

Azaleas
Image credit: https://imagesvc.meredithcorp.io/

Hardiness zones and sizes depend on variety as some are suitable for most climates from zones 3 to 9 and from sizes ranging from 2 to 3 feet to 15 feet. Azaleas are excellent in woodland settings.

Their foliage is unremarkable after the flowers have faded, although some varieties have pleasing fall colors. Unless your soil has the natural acidity preferred by azaleas, feed them with an acid-enhanced fertilizer formulated for acid-loving plants such as rhododendrons, camellias and azaleas.

Their color varieties range from white, lavender, purple, orange, peach, pink and red. Grow this plant in full sun to part shade and soil needs include rich, medium moisture and well drained soil. It also prefers acidic soil.

10. Hibiscus Syriacus

This plant is a deciduous shrub that typically grows 6 to 10 feet tall and as wide. It has an upright growth habit with arching branches. White flowering shrubs with yellow centers appear in late summer to early fall. Plant in partial sun to part shade and soil that is moist, well-drained, and has some organic matter.

11. Snows of Kilimanjaro

This plant is a large tropical shrub that typically grows 6 to 10 feet tall and 4 to 16feet wide. It has an upright growth habit with arching branches. White flowers with yellow centers appear in late summer to early fall.

As a member of the Euphorbia genus, it’s related to that Christmas favorite. Its alternate common name is known as little Christmas flower. As with poinsettias, flowering comes into bloom as days shorten. When the fragrant white flowers emerge, the bush reminds of a giant snowball.

To promote that snowball look, give the plant a severe pruning back in early spring, then another in early summer. When pruning, make sure you wear gloves because you may be allergic to its milky sap. It Grows in zones 10 to 13 and prefers full sun to part shade. Soil needs include medium moisture to well drained soil.

12. Dwarf Deutzia

This plant also has a great look for the winter months. Its leaves are smaller and more along those of perennials. The flowers will emerge in spring as do those from the shrub form.

Dwarf Deutzia
Image credit: https://www.thespruce.com/

What makes it special despite being a shrub is that it can function as a ground cover because it stays so short and is wider than it is tall, approximately 2 feet tall with a spread of 5 feet. It’s a late spring bloomer with small but fragrant bell-shaped flowers.

The foliage on the dwarf variety turns an attractive burgundy in the fall. It needs regular pruning because their branches are fairly short-lived. Soil needs include medium moisture soil and good tolerance for clay soil. Grows in hardiness zones 5 to 8 and thrives in full sun to part shade.

FAQs about Recommended White Flowering Shrubs

What is a shrub with white flowers?

Pieris Japonica, also known as the Japanese Andromeda, is another evergreen, spring-blooming shrub with white flowers and a beautiful scent. It’s easy to grow and has the added benefit of being deer resistant.

Why do these shrubs have white flowers?

The shrubs with white flowers have this color because they contain a lot of anthocyanins. This is a type of pigment that is responsible for the red, purple, and blue colors found in many flowers and fruits. These white flowers enable them to light up a garden in the springtime.

Final Thought on Recommended Shrubs with White Flowers

As you can see, there are several shrubs that can help brighten your garden in the springtime. If you’re looking for plants that will bloom white flowers, then be sure to consider these options. Not only are they beautiful, but they’re also easy to grow and maintain. So, what are you waiting for? Start planting today!

The post 12 Shrubs with White Flowers appeared first on Kitchen Infinity.